(O) Contributo orale / (P) Contributo poster

– M. Scatto, “Anti-microbial Polymer Nanocomposite for the AM FFF based production of Personalized
Medical Assistive Devices”, 11th World Biomaterial Congress, 11th-15th December 2020, Glasgow, Scotland (P)

– M. Scatto, 3D Medical printing Conference and Expo, Perugia, Italy, from 9-7 to 10-7-2019, “Bioactive
Polymer Compound and Cold Atmospheric Plasma in Advanced Manufacturing of hybrid materials,
the experience of H2020 project FAST”, invited speaker (O)

– M. Scatto, 2° Congresso IDBN – Italian Digital Biomanufacturing Network – III Thematic Conference ESB-
ITA – European Society of Biomechanics-ITA, Pavia, Italy, from 5-9 to 7-9-2018, “Polymer nanocomposite
and atmospheric plasma technology for 3D printing scaffolds in regenerative medicine” (O)

– M.Scatto, 4th International Conference on Biomedical Polymers & Polymeric Biomaterials, Krakow,
Poland, from 15-7 to 18-7-2018, “Melt Compounded Polymer Nanocomposite for the Production of 3D
Printing Scaffold in Regenerative Medicine” (O)

– M.Scatto, E. Gasparotti, S. Celi, 4th International Conference on Biomedical Polymers & Polymeric
Biomaterials, Krakow, Poland, from 15-7 to 18-7-2018, “Melt Compounded Biocompatible Thermoplastic
Polyurethane TPU for the Engineering of 3D Printed Aortic Heart Valve Ring Design Fabrication Testing
and Simulation” (P)

– M.Scatto, A. Patelli, P. Scopece, 4th International Conference on Biomedical Polymers & Polymeric
Biomaterials, Krakow, Poland, from 15-7 to 18-7-2018, “Surface Functionalisation Nanoroughness and
Drug Delivery by Atmospheric Plasma Jet on scaffolds” (P)

– M.Scatto, XVI International Clay Conference, Granada, Spain, from from 17-7 to 21-7-2017, “Benefit on
clay in polymer nanocomposite for biomedical engineering: from clay properties to polymer composite
performance” (O)_Keynote and chairman in Session

– M. Nacucchi, M. Scatto, NanoItaly2015. Roma, Italy from 21-9 to 24-9-2015, “Structural analysis of high
performance polymeric foams by high resolution X-ray computed tomography” (O)

– M. Scatto, Regional Conference Polymer Processing Society 2015, Graz, Austria, from 21-9 to 25-9 2015,
“Active Polyurethane Nanocomposite foams”. (P)

– M. Scatto, Regional Conference Polymer Processing Society 2015, Graz, Austria, from 21-9 to 25-9 2015,
“Active Polymer Nanocomposites: Application in Thermoplastic Polymers”. (P)

– C. Rosato , M. Scatto, F.Felline, A. Tinti, 1° Workshop on Nanotechnology in Instrumentation and
Measurement, Lecce, Italia, from 24-7 to 25-7-2015, “Active Polymer Nanocomposites: application in
thermoplastic polymers and in polymer foams” (O)

– M. Scatto, P. Scopece, R. Albertoni, M. Andrenucci, NanotechITALY2014, Venezia, Italia, from 26-11 to 28-
11-2014, “Synergies in the Development of Advanced Materials for Space Applications”. (O)

– M. Scatto, M.Sisani, L- Manodori, L. Bregoli,, A. Viviani,, G. Brusatin, NanotechITALY2013, Venezia, Italia,
from 27-11 to 29-11-2013, “Polyporopylene/Layered double hydroxide nanocomposites for active packaging
solutions”. (P)

– S. Coiai, E. Passaglia, N. Muksing, L. Conzatti, P. Stagnaro, M. Scatto, L. Andreotti, M. Sisani,
U. Costantino, TUMA 2009, Pisa, Italia, from 20-9 to 22-9-2009, “Factors affecting the dispersion of organo-
layered double hydroxides in a polyolefin matrix”. (O)

– F. Azzurri, L. Conzatti, P. Stagnaro, D. Cavallo, M. Scatto, XVIII Convegno Nazionale AIM (Associazione
Italiana Macromolecole), Milano, Italia, from 13-9 to 17-9-2009, “Flow induced crystallization of LDPE
nanocomposites”. (P)

– S. Bronco, M.B. Coltelli, S. Castiello, M. Bertoldo, F. Signori, F. Ciardelli, M. Scatto, E. Salmini, L. Andreotti,
Polymerfest, Palermo, Italia, from 30-8 to 2-9-2009, “Fine modulation of Poly(lactic acid) properties by
Poly(butylene adipate-co-terephthalate) blending and extrusion process and Acetyl Tributyl Citrate
plasticization”. (O)

– M. Scatto, L. Andreotti, E. Salmini, M.B. Coltelli, S. Castiello, S. Bronco, L. Conzatti, A. Zanolin, M. Sterner, EPF
(European Polymer Congress) 2009, Graz, Austria, from 12-7 to 17-7-2009, “Plasticized and nanofilled PLA
composite prepared by melt compounding in a Twin Screw Extruder”. (O)

– D. Prevosto, M. Lucchesi, E. Passaglia, M. Bertoldo, S. Coiai, M. Scatto, F. Ciardelli, P.A. Rolla, Polychar17
World Forum on Advanced Materials, Rouen, France, from 20-4 to 24-4-2009, “Influence of clay on relaxation
dynamics in materials for gas barrier application”. (O)

– D. Prevosto; M. Labardi; S. Capaccioli; M. Lucchesi; E. Passaglia; K. Nguyen; M. Bertoldo ; S. Coiai; M.
Scatto; A. Saiter,; L. Delbreilh; F. Ciardelli; P.A. Rolla, 6th International Discussion Meeting on Relaxations in
Complex Systems, from 30-08 to 05-09-2009, “Interfacial relaxation Dynamics in nanocomposite materials”. (O)

– M. Scatto, L.Andreotti, E. Salmini, A. Zanolin, S. Coiai, M. Sterner, M. Bertoldo, E. Passaglia, L. Conzatti, P.
Stagnaro, F. Azzurri, Nanotec2009.it, Roma, Italia, from 31-3 to 3-4-2009, “Polyolefin nanocomposites prepared
by melt compounding in a twin screw extruder”. (P)

– F. Azzurri, P. Stagnaro, L. Conzatti, D. Cavallo, L. Repetto, M. Scatto, L. Andreotti, S. Coiai, 4th International
Conference Time of Polymers (TOP) and Composites, Ischia, Italia, from 21-9 to 24-9-2008, “In situ Rheo-SALS
experiments on LDPE nanocomposites: a preliminary study”. (P)

– F. Ciardelli, A. Pucci, G. Ruggeri, S. Bronco, F. Signori, M.B. Coltelli, L. Andreotti, M. Scatto, 4th Nanoforum,
Milano, Italia, 17-18 September 2008, “Materiali nanostrutturati e biocompatibili: preparazione, prestazioni e
vantaggi per l’agro-alimentare”. (O)

– S. Coiai, M. Scatto, L. Andreotti, M. Bertoldo, L. Conzatti, E. Passaglia, M. Sterner, XVII Congresso Nazionale
di Chimica Industriale, Genova, Italia, from 30-6 to 3-7 2008, “Process parameters for modulating structure and
properties of LDPE nanocomposites”. (O)

– M. Scatto, S. Coiai, L. Andreotti, M. Bertoldo, E. Passaglia, L. Conzatti, M. Sterner, XXIV Meeting della Polymer
Processing Society, Salerno, Italia, dal 15-6 al 19-6 2008, “Effect of process parameters on the properties of
nanocomposites prepared by melt compounding in a twin screw extruder”. (O)

– M. Scatto, L. Andreotti, A. Pucci, G. Ruggeri, M. Sterner, XXIV Meeting della Polymer Processing Society,
Salerno, Italia, dal 15-6 al 19-6 2008, “Continuous extrusion of polyolefinic films showing macromolecular
orientation-dependent linear dichroism”. (P)

– M. Scatto, S. Coiai, L. Andreotti, M. Bertoldo, E. Passaglia, L. Conzatti, M. Sterner, Congresso EPF (European
Polymer Congress) 2007, Portorose, Slovenia, dal 1-7 al 6-7 2007, “Effect of compounding process parameters
on the morphological and thermal properties of LDPE-layered silicate nanocomposites”. (P)

– L. Andreotti, M. Scatto, A. Pucci, G. Ruggeri, M. Sterner, Congresso EPF (European Polymer Congress) 2007,
Portorose, Slovenia, dal 1-7 al 6-7 2007, “Monitoring the polyethylene films orientation during melt-processing
through UV-Vis and IR spectroscopy in polarized light”. (P)

– M. Scatto, S. Coiai, L. Andreotti, M. Bertoldo, E. Passaglia, L. Conzatti, M. Sterner, XVIII Convegno Nazionale
AIM (Associazione Italiana Macromolecole), Catania, Italia, from 16-9 to 20-9 2007, “Compounding LDPE-
layered silicate nanocomposites: effect of process parameters”. (P)

– M. Scatto, S. Coiai, L. Andreotti, M. Bertoldo, E. Passaglia, L. Conzatti, M. Sterner, Congresso EPF
(European Polymer Congress) 2007, Portorose, Slovenia, from 1-7 to 6-7 2007, “Effect of compounding
process parameters on the morphological and thermal properties of LDPE-layered silicate nanocomposites”. (P)

– L. Andreotti, M. Scatto, A. Pucci, G. Ruggeri, M. Sterner, Congresso EPF (European Polymer Congress)
2007, Portorose, Slovenia, from 1-7 to 6-7 2007, “Monitoring the polyethylene films orientation during melt-
processing through UV-Vis and IR spectroscopy in polarized light”. (P)

– M. Scatto, E. Brunengo, L. Conzatti, P. Stagnaro, M. Castellano, XXII Convegno Nazionale AIM (Associazione
Italiana Macromolecole), Genova, Italia, from 11 to 14-09-2016, ”Valorizzazione di fibre di canapa non tessili per
la preparazione di compositi a base di poliestere biodegradabile”. (P)

– M. Scatto, Asimakopoulou E.K., Zhang J., McKee M., Wieczorek K., Krawczyk A., Andolfo M., Sisani M.,
Bastianini M., “Investigation of synergistic effects of inorganic smart fillers and expanded graphite on the flame
retardancy of polyisocyanurate insulation foam”, 9th International Seminar on Fire and Explosion Hazards, 21th-
26th April 2019, Saint-Petersburg, Russia. (P)

– M. Scatto, Asimakopoulou E.K., Zhang J., McKee M., Wieczorek K., Krawczyk A., Andolfo M., Sisani M.,
Bastianini M., “Assessment of fire behaviour of polyisocyanurate (PIR) insulation foam enhanced with lamellar
inorganic smart fillers”, 3rd European Symposium of Fire Safety Science, 12th -14th September 2018, Nancy,
France. (O)

Seminari

• Seminar in University of Perugia, 17 June 2015, with title: “Application of nanotechnology in advanced
manufacture sector: from bulk additive to surface treatment”

• Seminar Thermo Fisher Scientific, 7 June 2016, with title: “Active nanocomposite production and atmospheric
plasma surface functionalization in Additive Manufacturing Industries” (Activities involved in the H2020 FAST
Project-GA685825)

• Seminar in ASI (Italian Space Agency), 21 May 2016, “Primo Workshop Nazionale su: Additive Manufacturing
per lo Spazio: Stato dell’arte, Sviluppi e Prospettive” with title of presentation: “Functionally graded Additive
manufacturing Scaffolds by hybrid manufacTuring (Activities involved in the H2020 FAST Project-GA685825)”

• Seminar in ISMAC (Institute for Macromolecular Studies), 28 April 2016, with title: “Active nanocomposite
production and atmospheric plasma surface functionalization in Additive Manufacturing Industries”

• Seminar in AM-Motion: A strategic approach to increasing Europe’s value proposition for Additive
Manufacturing technologies and capabilities, 15 November 2017, with title: “Functionally Graded Additive
Manufacturing Scaffolds by Hybrid Manufacturing”

• Seminar in “Sustainability in Fragrance & Cosmetics” joint professorship CEREMONY
and EFCM/MBM, XVIII edition, CLOSING SEMINAR , 11 March 2019, Archivio Antico, Padova

• Seminar in “4 th Bioprinting Winter School 2020” 14 February 2020, with title: “Tailor made polymer compound as
innovative bioactive ink in Bioprinter. Innovative inks based on thermoplastic polymer compounds with biologically
active properties”.